Darkglass Microtubes X7

Darkglass Microtubes X7 brings the studio method producers have been using the years to cover the whole bass distortion spectrum: from articulate high gain to punchy mild overdrive, raw and gnarly fuzz and everything in between. You now have absolute control in constructing your vision of what the perfect bass distortion texture, definition, and size should have.

The pedal has 6 knobs and 5 sliders for adjusting the EQ of your signal. The Low Comp knob Sets the amount of compression for the low-pass signal. The Low Level knob sets the output volume of the low-pass signal. The High Drive knob sets the amount of distortion for the high pass side. The High Level knob sets the output volume of the distorted high-pass signal.

The High Pass Frequency knob controls the cutoff frequency to be distorted, ranging from 100Hz (for thicker, fuzzier saturation) or 1kHz for ultra-sharp definition. The Low Pass Frequency knob controls the cutoff frequency to be mixed back to the high-pass side. Ranging from 50Hz (for only sub-bass) and 500Hz to preserve some clean mids.

There are 5 sliders on the pedal. The Master slider sets the overall volume of the unit. The Low shelf slider boosts or cuts frequencies around 80 hZ by 12 dB. The 500 Hz slider boosts or cuts frequencies around 500 hZ by 12 dB. The 1 kHz slider boosts or cuts frequencies around 1 khZ by 12 dB. And the High shelf does the same with frequencies around 5 kHz.

The pedal is powered by a standard 9 volts power supply (sold separately)

Darkglass Microtubes X7 demo video